Skip to content

Is it really rising damp?

Damp at the bottom of a wall gets called rising damp far more often than it is. Leaking gutters and pipes, raised ground outside and condensation cause most of it, and they are usually cheaper to fix. Answer five questions to see the likeliest causes before anyone quotes you for an injected damp-proof course.

Damp cause checker

Answer all five to see the likeliest causes.

What it's most likely to be.

This is a guide to where to look, not a diagnosis. Several causes often combine, and only testing on site can confirm which one you have.

Why rising damp is over-diagnosed

Genuine rising damp is groundwater drawn up through masonry. It needs a wall in contact with wet ground and a missing or failed damp-proof course, and it rarely climbs higher than about a metre to a metre and a half, because the wall dries out faster than water can rise.

The trouble is the test most often used to find it. A handheld electrical moisture meter, the kind with two pins pressed against the wall, measures how well the surface conducts electricity, not how much water is in it. Salts left behind by old damp, foil-backed plasterboard and some paints all read "wet" on a perfectly dry wall, which the British Standard on moisture control (BS 5250) warns about. The reliable tests take a drilled sample of the masonry and measure its actual water content: a carbide meter on site, or weighing and oven-drying it.

The causes that get mistaken for it

  • A bridged damp-proof course, where a raised patio, flower bed or driveway, or render carried down to the ground, lets water step over it. Building Regulations put the damp-proof course at least 150mm above the ground outside for this reason.
  • Rain getting in (penetrating damp) through cracked pointing or render, leaking gutters and downpipes, or blocked drains splashing back onto the wall.
  • Leaks from a weeping radiator valve, a pipe under the floor or a drain, which can wet the bottom of a wall exactly like rising damp.
  • Condensation, because the bottom of an outside wall is often its coldest part, so condensation and mould gather there too. Check it with the condensation calculator.

Before you pay for a damp-proof course

Ask whoever surveys the wall how they measured the moisture. If the only test was a handheld meter reading on the plaster, ask for a salt test or a drilled-sample reading before agreeing to injection and replastering. Fix gutters, leaks and ground levels first. They're cheaper, and if they were the cause, the wall will start drying on its own. Read more about rising damp and how we test for it.

Want it checked properly?

Book a free Thermal Damp Check

Usually the same week

1
2

What have you noticed?

Where should we call you?

That number looks too short. Please check it, as it's how we'll reach you.

We'll only use your details to arrange the check, and we won't pass them on. See our privacy policy.

Same-week No obligation

Thanks, that's come through.

We'll call you within one working day to arrange your Thermal Damp Check. If it's urgent, call 07365 672153.

Call 07365 672153 Book a free check